Design Hardware ALK-2000 Exit Alarm Kit for 2000 Series Devices

Usually Ships: 3-5 Days
  • Help prevent unauthorized use of an emergency exit door
  • For 2000 series rim & surface vertical rod exit devices
  • Alarm is activated when push bar is depressed

Available Options:

Clear

The 2000 Series Exit Alarm Kit is a retrofit kit used to help prevent unauthorized use of an emergency exit door.

  • For use with Design Hardware 2000 series rim & surface vertical rod exit devices, panic or fire-rated
  • Compatible with Trudoor TDE-2000 series devices
  • Alarm is armed/disarmed by turning key in the mortise cylinder (cylinder included)
  • LED flashes green every 30 seconds to indicate alarm is in armed position
  • Bypass: Alarm is activated when push bar is depressed
  • 9 Volt battery, life approximately 1 year – Low battery alert indicated by red flash & chirp every 5 seconds
  • Decibel Rating: Approximately 90 decibels at 15 feet
  • Included Parts: New Slide Cover with LED indicator, Alarm Board, Mounting Plate, Mortise Cylinder, Cylinder Collar, Back Plate, Cylinder Retaining Ring 9 Volt Battery, “Emergency Exit” Sticker for touchpad or door face
Brand

Length

33" (for 3' device), 42" (for 4' device)

Part Type

Alarm Kit

Cylinder

1 1/8″ Mortise cylinder with std. cam (included) – 6 Pin Brass, C Kwy, with 2 Keys

Keyway

Schlage C Keyway

Finishes

689 Aluminum