Air Louvers PS VELO™ Privacy Screen for Vision Lite Kits

An attractive, cost-effective way to add a privacy shade to existing Vision Lites in schools, offices, or wherever privacy is needed!

Complete blocking of vision & light and attaches without tools.

Material: 18 gauge aluminum frame

Construction: 1-1/4” x 1/4” frame on 4 sides with radius corners, mitered and welded.  7/8” deep slots on both sides do not allow any light—even on the edges.

Roller: A spring-operated roller in an aluminum housing with black endcaps allows for controlled opening and closing of the unit.  Push-button closer quickly and easily rewinds shade. Roller Unit extends 1” from frame face.

Shade: A durable 100% opaque, black, light-blocking fabric material is attached to a rigid pull-down bar-mounted into the side channels.  The shade slides up and down with ease and locks into position into the bottom track.

Sizes: Minimum 169 sq. inches for UL listing from 6-3/8″ wide, smaller sizes to 5″ W x 7″ H available without listing, Maximum width 31-3/8″ x  37-3/8”. Order in any size in  1/8” increments.

Installation: Attach to installed vision lite using 5/8” hook and loop fasteners provided.  Thickness of the vision lite or construction material does not matter as long as there is a flat 5/8” frame on which to mount the privacy screen.

UL Listing 90 Minutes: Tested to maintain existing door, vision kit and glazing ratings up to 90 minutes for: Steel and wood doors, both temp-rise and non-temp-rise. Privacy Screen must be attached to a metal vision frame kit, not to the door itself, wood vision frame kits or to wood stops.

Field Painting of This Product Not Recommended.

This product is made to order and non-returnable or refundable.

Call us at 1-844-TRUDOOR (844-878-3667) for custom size privacy screens