Rockwood K1050 Series Kick Plate – US10B (Oil Rubbed Bronze)

• FASTENERS: #6 x 5/8″ Oval Head Sheet Metal Screws
• ANSI: J102 – Metal kick plate

NFPA 80 STANDARDS – 2-4.5 Protection Plates: Factory-installed protection plates shall be installed in accordance with the listing of the door. Field-installed protection plates shall be labeled and installed in accordance with their listing.

Exception: Labeling is not required where the top of the protection plate is not more than 16 in. (406 mm) above the bottom of the door.

Note: US10B is a beautiful oiled, living finish. By definition, a “living finish” means that this finish will change over time with weather, usage, and the use of chemicals for cleaning purposes. It is not unusual for plates to come out of the packaging streaked. In some cases, US10B plates may need to have the finish smoothed over after installation by wiping lightly across the surface with a dry cotton cloth or with a cloth that is dampened with a small amount of 3 in 1 oil. WD-40, motor oil, or silicone spray oils are not viable substitutes. The beautiful character of US10B develops over usage and time. After some time, the base metal will begin to glimmer and show through the surface. This finish is meant to be inconsistent and is intended to age over time which adds to the antique look of this finish. If you are expecting a painted or plated surface that will stay the same over time, alternate finishes may be more suitable for your application.