Product Overview
Concealed edge mount architectural grade aluminum hinges. No mortise required. For new construction or renovation/retrofit. Hinge failure is the most common cause of entrance failure. The revolutionary SELECT geared continuous hinge puts an end to costly and frustrating hinge failure problems.
Flush mounted (no door inset). For 1-3/4″ doors.
SL11 LL geared continuous hinges are BHMA Grade 1 certified.
Additional fastener holes for low-frequency doors up to 1,000 lb., including most lead-lined doors.
- Lengths: 79″, 83″, 85″, *95″, *120″
- Lifetime lubrication
- Anodized after machining
- Consistent templating
*excessive length shipping fee applies
Brand | |
---|---|
Finishes | Clear Anodized Aluminum, Black Anodized Aluminum, Dark Bronze Anodized Aluminum |
Length | 83" (for 7'0" door), 85" (for 7'2" Door), 95" (for 8'0" door), 120" (for 10'0" door) |
Material | Extruded 6063 T6 aluminum alloy with self-lubricating polyester thrust bearings. |
Usage | Heavy Duty |
Load / Frequency | For 1-3/4" doors, 48" max. door width in 16 gauge hollow metal (min.) or 1/8" aluminum (min.). Additional fastener holes for low-frequency doors up to 1,000 lb., including most lead-lined doors. |
ANSI/BHMA Standard | ANSI/BHMA A156.26-2006 Grade 1 |
Fire Rating | All SELECT hinges have been UL® tested and listed to 90-minute Fire Rating Standards without fire pins or studs—at no extra cost |
Continuous Hinge Type | Full Mortise (Concealed) |
Buy American Act Compliance | Meets Buy Amercian Act – Made in USA |