Concealed edge mount architectural grade aluminum hinges. No mortise required. For new construction or renovation/retrofit. Hinge failure is the most common cause of entrance failure. The revolutionary SELECT geared continuous hinge puts an end to costly and frustrating hinge failure problems.
Flush mounted (no door inset). For 1-3/4″ doors.
SL11 HD geared continuous hinges are BHMA Grade 1 certified.
- LIFETIME LUBRICATION
- ANODIZED AFTER MACHINING
- PATENTED 3-HR. FIRE RATING
- CONSISTENT TEMPLATING
79" (for 6'8" door), 83" (for 7'0" door), 95" (for 8'0" door)
Extruded 6063 T6 aluminum alloy with self-lubricating polyester thrust bearings.
|Load / Frequency||
For 1-3/4" doors, 48" max. door width in 16 gauge hollow metal (min.) or 1/8" aluminum (min.).Heavy Duty – Tested per BHMA standards. Up to 200 lb. doors (high-frequency) and up to 400 lb. doors (medium-frequency) without frame or door reinforcement; up to 600 lb. doors (low-frequency) with the use of Rivnuts in the frame.
ANSI/BHMA A156.26-2006 Grade 1
3 Hour Fire-rated
|Continuous Hinge Type||
Full Mortise (Concealed)
|Buy American Act Compliance||
Meets Buy Amercian Act – Made in USA
NGP (National Guard) - HD2400 Heavy Duty Concealed Continuous Geared HingeStarting at: $115.00Usage: Heavy Duty
NGP (National Guard) - HD1100 Heavy Duty Concealed Continuous Geared HingeStarting at: $110.00Usage: Heavy Duty
Ives - 112HD Heavy Duty Full Mortise Continuous Gear HingeStarting at: $108.00Usage: Heavy Duty
Ives - 224HD Heavy Duty Full Mortise Continuous Gear HingeStarting at: $115.00Usage: Heavy Duty
Hager - Roton 780-224HD – Heavy Duty Full Mortise Continuous Gear HingeStarting at: $129.00Usage: Heavy Duty