Adams Rite Dual Force 2190 Series Interconnected Deadbolt/Deadlatch

Usually Ships: 3-5 Business Days
  • Provides security for narrow stile aluminum doors
  • Includes standard trim set (non-electrified)
  • Cylinder(s) not included (sold separately)

Available Options:


Adams Rite Dual Force® 2190 Series Interconnected Deadbolt/Deadlatch, 1 With Trim Set

The 2190 Series Interconnected Deadbolt/Deadlatch provides access control and security for narrow stile aluminum (2190). Deadlatch and deadbolt capabilities are combined for fast, easy, and panic-proof exiting.


The Dual Force combines the access control capabilities of a latch with the security of a deadbolt. The key retracts and extends the deadbolt and deadlatch from either side. The exterior lever retracts the latch only. With the deadbolt projected, a simple turn of the inside lever retracts both the latch and deadbolt simultaneously, providing single-motion, panic-proof exiting. The Dual Force is available with electrified trim set for easy integration into an existing access control system. Standard and electrified trim sets are for out-swinging doors only; low profile trim set designed for in-swinging doors only.


Key or thumbturn projects or retracts deadbolt or deadlatch. Lock accepts any standard 1″ [25.4 mm] length, 1-5/32″ [29.4 mm] diameter mortise cylinder with MS® cam such as the 4036 Mortise Cylinder, available separately. Lock accepts cylinder from either or both sides.
Inside lever retracts both deadbolt and deadlatch when configured with interconnect feature. Outside lever retracts latch only. Latch holdback feature activated or deactivated by turning key to retract latch. Sliding holdback button on faceplate down will hold back latch and sliding up will release. The 2190 Series Interconnected Deadbolt/Deadlatch are designed to operate with the uniquely designed strike plate that comes standard in the package from the factory.


Cylinder Backset: 1-1/8″ [28.6 mm] or 1-1/2″ [38.1 mm] only

Latchbolt: 5/8″ [15.9 mm] throw of solid brass. Easily reversible using only a screwdriver.
Deadbolt: 1″ [25.4 mm] throw of stainless steel.

Auxiliary Deadlatch Pin: Stainless steel. Deadlocks latchbolt to prevent “loiding” or case-knife entry.

Faceplate: Includes faceplate system that adapts to flat, radius, or beveled door edge. Finish to match trim.
2190: Measures 1″ x 6-7/8″ [25.4 mm x 174.6 mm]. Radius with weatherseal faceplate available separately.

Strike: The Dual Force 2190 Interconnected Deadbolt/Deadlatch will not operate without its specially designed strike, included standard in package.
2190: Standard strike furnished is the 2101-01 Strike for flat jamb where door closes flush or nearly flush. The 2101 Strike covers MS® Deadlock strike preparation with modification, and the 4901 Deadlatch Strike directly. Also available in radius version for opposite stile pairs of doors and with extended lip strikes for special jamb conditions.

Inter Connection: Field-selectable inter-connection feature allows interior trim to retract deadbolt and deadlatch. Consult local authority having jurisdiction (AHJ) for guidance in code compliance. 1-3/4″ [44.5 mm] minimum door thickness required.
• 2190 retrofits to existing MS1850S Deadlock or 4500 and 4900 Deadlatch of the same backset.

Standard Package: Individually boxed with trim as specified, strike, and machine screws for mounting. Cylinder available separately.



US10B (613) Oil Rubbed Bronze, US32D (630) Satin Stainless Steel


1-1/8" Backset, 1-1/2" Backset


Completely Reversible

Related Products

  • MS403-130

    Adams Rite - MS4043 Cylinder Guard

    Multiple Finishes
  • ADAMS-RITE-4036-01-628

    Adams Rite - 4066-01 1″ Mortise Thumbturn Cylinder

    Multiple Finishes

    Adams Rite - MS1850S, MS1850S-X5X Series MS Deadlocks

    Multiple Finishes
    Starting at: $48.64
  • Adams-Rite-4036-628

    Adams Rite - 4036-01-01 1″ Mortise Cylinder For MS® Lock and Deadlatches

    Multiple Finishes
Adams Rite Dual Force 2190 Series Interconnected Deadbolt/Deadlatch