Select SL77 HD600 Heavy Duty Half Surface Geared Continuous Hinge

Usually Ships: 2-3 Business Days

Safety hinge (when used without frame stop)
Supports weights up to 600lbs
Tamper-resistant, removable door leaf cover

Available Options:

Finish
Length	Clear

Quantity:

Hinge failure is the most common cause of entrance failure. The revolutionary SELECT geared continuous hinge puts an end to costly and frustrating hinge failure problems.

Safety hinge (when used without frame stop)
Can be used in center-hung application
Provides clearance sufficient to avoid the pinching of fingers
Tamper-resistant, removable door leaf cover
Can be used for center-hung applications (without safety feature)
3/32″ door inset when used as a safety hinge

SL77 HD600 geared continuous hinges are BHMA Grade 1 certified.

Lifetime lubrication
Anodized after machining
Consistent templating

Brand	Select
Finishes	Clear Anodized Aluminum, Dark Bronze Anodized Aluminum
Length	83" (for 7'0" door), 85" (for 7'2" Door), 95" (for 8'0" door)
Material	Extruded 6063 T6 aluminum alloy with self-lubricating polyester thrust bearings.
Load / Frequency	For 1-3/4" doors, 48" max. door width in 16 gauge hollow metal (min.) or 1/8" aluminum (min.). Heavy Duty 600 – For high- frequency doors up to 600 lb. Rivnuts are recommended in the frame when the door exceeds 450 lb.
Usage	Heavy Duty
ANSI/BHMA Standard	ANSI/BHMA A156.26-2006 Grade 1
Fire Rating	All SELECT hinges have been UL® tested and listed to 90-minute Fire Rating Standards without fire pins or studs—at no extra cost
Continuous Hinge Type	Half Surface
Buy American Act Compliance	Meets Buy Amercian Act – Made in USA