Pemko FS_HD1-M PemKonnect Modular Full Surface Continuous Gear Hinge, Heavy Duty

Pemko _FS_HD1-M PemKonnect Modular Heavy-Duty Full Surface Continuous Gear Hinge

Pemko’s latest groundbreaking innovation the patent-pending PemKonnect™ Modular Hinge was designed with you in mind. With a 50% reduction in packaging size, this multi-piece continuous hinge conveniently fits through doors, elevators, into vans; and can even be stored on shelves.

• Designed mainly for retrofit work, and are applied to the exposed surfaces of the door and frame
• Hinge segments fit together easily, No extra tools needed for assembly
• Packed in a 45″ box (decreased freight damages and freight costs)
• HD1 hinges conform to Grade 2-150, Grade 1-300, and Grade 1-600 cycle requirements per BHMA standard ANSI/BHMA A156.26-2006
• ANSI/BHMA A156.26 and UL certified
• Width: 1-1/4” (frame side – leaf)
• Width: 1-3/8” (door side – leaf)
• Cap Width: 25/32”
• Height: 29/32” (total height of hinge)
• Length: 83″ (comes in two segments), *12″ (connector segment), and 95″ (comes in three segments _FS83HD1-M + _FS12HD1-M)
• Finishes: C (Clear Anodized) and D (Dark Bronze Anodized)

*The 12” (FS12HD1-M) hinge segment is available to create a 95” hinge. Combining multiple 12″ segments to create a custom length will void any applicable warranties and certifications. The 12″ segment must be installed in between 40″ and 43″ segments.

Fasteners, Frame:

• #12-24 x 7/16″ FHUC, Type C threadforming, no tapping required
• 10 fasteners required per frame leaf
• Wood screws available upon request

Fasteners, Door:

• #12-24 x 11/16″ Pan Head, self-drilling, self-tapping
  – 6 required per door leaf
• 1/4-20 x 1-5/8″.Thru-Bolt & 1/4-20 x 1″ Shoulder Bolt
  – 4 required per door leaf

Models: CFS83HD1-M, DFS83HD1-M, CFS12HD1-M, DFS12HD1-M, CFS95HD1-M, DFS95HD1-M