Ives 700 Heavy Duty Stainless Steel Full Mortise Pin and Barrel Continuous Hinge

Usually Ships: 5-10 Days
  • For 1-3/4″ doors weighing up to 600 pounds
  • 83″ or 95″ length, 48″ maximum door width
  • UL Listed – Fire-rated

Available Options:


Steel pin and barrel continuous hinges share many of the same characteristics of a traditional hinge. Both have a center pin and rolled knuckles, but a steel pin and barrel continuous hinge stretches along the entire length of the frame. The unique design distributes the weight of the door along the entire length of the frame, reducing the high amount of stress normally associated at top of the door and frame on butt hinge applications. Not only does this reduce hinge failure, but it also keeps the door in constant alignment, eliminating door sag. These characteristics make continuous hinges suitable for high-use and high-traffic doors.

  • 1/4″ diameter pin with nylon self-lubricating, medical-grade split bearing
  • ƒƒFor doors weighing up to 300 pounds without reinforcing. 600 pounds with reinforcing
  • ƒƒ1/8” Inset recommended for 1-3/4″ doors
  • 48″ Maximum door width
  • Bevel or square edge door


630 Stainless Steel


83" (for 7'0" door), 95" (for 8'0" door)

Continuous Hinge Type

Full Mortise (Concealed)

ANSI/BHMA Standard

Meets ANSI 156.26


Heavy Duty

Fire Rating

UL Listed – Tested and approved UL 10C