1900A fusible link louver for 1-3/4″ thick fire doors, 45-90 minute fire-rated
Adjustable Fusible Link Louvers are recommended for use in rooms where ventilation is needed and at the same time isolating the room whenever fire is present. When exposed to heat at 165° F, the fusible link trips and the spring-loaded louver blades shut, to form an airtight fire and smoke seal.
1900A Frame: Mitered and welded corners: screws fastened through prepared frame into louver core leaving corridor side of frame free of fasteners.
- Mitered and Welded Corners
- Free Flow Area: 45% free
- Fusible link design temperature 165°F max
- Single side mounting for non-corridor exposure with fastening screws included
- Designed for use with 1-3/4″ doors only
- UL Listed for use in 45-90 minute fire-rated doors (not allowed in 20 min. or 3-hour doors)
- Order size is equal to door cutout size
Operation: Adjustable blades of 16 gauge CRS pivot on cadmium-plated steel rivets. The blades are operated by a manual adjusting lever. A spring loaded fusible link mechanism is incorporated into the design; upon melting of the link, the action bar is actuated, thereby closing and locking all of the blades.
Z-blade louver is riveted to the operating bar and frame at 1″ intervals to welded 1-9/16″ deep frame. Mechanical Stop holds blades open.
Fire door testing: CAN/ULC S104, NFPA252, UBC 7-2-94, UL10(b), UL10(c). Installed in accordance with NFPA-80. Louver size shall not exceed maximum width and height shall not be less than 10″ and 6″, respectively. Louvers may be provided for classified hollow metal type and composite type fire doors. Consult with the Local Authority Having Jurisdiction (AHJ) to determine appropriate standards. Louver frame will be labeled with Listing mark.
Gray, Mineral Bronze
12" x 12", 18" x 12", 18" x 18", 24" x 12", 24" x 18", 24" x 24"
18 gauge CRS frame
45 to 90 Minute – CAN/ULC S104, NFPA252, UBC 7-2-94, UL10(b), UL10(c)
|Free Flow Area||
45% Free Area
Phillips head screws #8 x 3/4" – Included
|Buy American Act Compliance||
Meets Buy Amercian Act – Made in USA
Air Louvers - 800A1(S) Stainless Steel Louver with Inverted Y BladesStarting at: $219.00
NGP (National Guard) - L-700-RX Steel LouverStarting at: $62.00
Trudoor Choicestandard lite frames
Air Louvers - VSL Slimline Vision Lite Frame for 3/16″ to 1/4″ Glass, 1-3/4″ Thick DoorStarting at: $36.00
Trudoor Choicefor standard louvers
Air Louvers - 800A1 Louver with Inverted Y BladesStarting at: $54.00