Pemko HM_HD Half Mortise Continuous Gear Hinge, Heavy Duty

Usually Ships: 5-10 Business Days

ANSI/BHMA A156.26 and UL certified
Designed mainly for retrofit work
Applied to the exposed surface of the frame and the door edge

Available Options:

Finish

Length

Clear

Quantity:

Pemko _HM_HD Heavy-Duty Half Mortise Continuous Gear Hinge

Heavy Duty Anodized Aluminum Continuous Geared – designed mainly for retrofit work and are applied to the exposed surface of the frame and the door edge.

Applied to the exposed surface of the frame and the door edge
Designed to require only 1/8″ clearance instead of 5/16″ and also allow for adjustments to properly align the edge of the door to the frame face.
ANSI/BHMA A156.26 and UL certified
Width: 1/8” (between frame edge and door edge)
Width: 2” (between frame leaf and door leaf edge)
Width: 5/32” (3.9 mm) (between jamb leaf and door leaf edge).
Width: 1-7/32” (30.9 mm) (jamb side – leaf).
Cap Width: 25/32”
Height: 3/4” (to top cap – jamb side)
Height: 3/4” (to top cap – door edge side)
Height: 1-19/32” (to flange – door edge side)
Length: 83″ or *95″
Finishes: C (Clear Anodized) and D (Dark Bronze Anodized)

*excessive length surcharge applies to 95″ model

Models: CHM83HD1, CHM95HD1, DHM83HD1, DHM95HD1

Brand	Pemko
Continuous Hinge Type	Half Mortise
Finishes	C – Clear Anodized Aluminum, D – Dark Bronze Anodized Aluminum
Length	83" (for 7'0" door), 95" (for 8'0" door)
Material	Aluminum
Usage	Heavy Duty
Door Applications	1-3/4″ Thick Doors
Warranty	10 Years