Select SL27 LL Heavy Duty Concealed Geared Continuous Hinge for 2″ to 2-1/4″ Thick Doors

Usually Ships: 2-3 Business Days

No door inset, for 2″ to 2-1/4″ thick door
Frame leaf covers butt hinge preps
Supports weights up to 1000lbs

Available Options:

Finish
Length	Clear

Quantity:

Concealed edge mount architectural grade aluminum hinges. No mortise required. For new construction or renovation/retrofit. Hinge failure is the most common cause of entrance failure. The revolutionary SELECT geared continuous hinge puts an end to costly and frustrating hinge failure problems.

For 2″ to 2-1/4″ doors, up to 1,000 lb.
Frame leaf covers butt hinge preps
Staggered hole pattern
Flush mounted (no door inset)
SL27 LL geared continuous hinges are BHMA Grade 1 certified
Lifetime lubrication
Anodized after machining
Consistent templating

Brand	Select
Finishes	Clear Anodized Aluminum, Black Anodized Aluminum, Dark Bronze Anodized Aluminum
Length	83" (for 7'0" door), 85" (for 7'2" Door), 95" (for 8'0" door)
Material	Extruded 6063 T6 aluminum alloy with self-lubricating polyester thrust bearings.
Load / Frequency	For 2" to 2-1/4" doors. 48" max. door width in 16 gauge hollow metal (min.) or 1/8" aluminum (min.). For low-frequency doors up to 1,000 lb., including most lead-lined doors.
ANSI/BHMA Standard	ANSI/BHMA A156.26-2006 Grade 1
Fire Rating	All SELECT hinges have been UL® tested and listed to 90-minute Fire Rating Standards without fire pins or studs—at no extra cost
Continuous Hinge Type	Full Mortise (Concealed)
Usage	Heavy Duty
Buy American Act Compliance	Meets Buy Amercian Act – Made in USA