Design Hardware

Design Hardware ELR-1000R Rim Exit Device with Electric Latch Retraction

$872.33
Usually Ships:  3-5 Business Days
  • Heavy Duty, ANSI A156.3 Grade 1 Standards
  • Energy-efficient motorized latch retraction
  • 24VDC filtered and regulated

Available Options:

Clear

Product Overview

Design Hardware ELR-1000R Grade-1 Rim Exit Device with Electric Latch Retraction, Exit Only, Satin Stainless Steel Finish

ELR - Electric latch retraction/hold back exit devices allow for remote keyless access in high occupancy/high traffic conditions such as hospitals, airports, schools and churches. The device may be continously energized allowing for a push/pull condition if desired.

The 1000 Series meets ANSI A156.3-Grade 1 Standards and comply with the ADA American Disabilities Act - providing you with durability, toughness, and safety. Design Hardware products all meet or exceed industry standards and can be substituted for any other specified brand.

  • Exit Only (Outside Trim Sold Separately)
  • Designed for high traffic conditions such as hospitals, airports, schools, and churches
  • Requires low power
  • Offers quiet operation
  • Operating Voltage: 24VDC Filtered and Regulated
  • Amperage: 1 AMP MAX inrush, 400mA MAX Holding
  • On-Board diagnostic LED indicators
  • Automatic retry
  • Low power requirements
  • Non polarized leads
  • Simultaneous latch retraction and dogging (push pad drepressed)
  • Momentary or maintained operation
  • Center Case Dim: 8″ Height x 2-7/8″ Wide x 2-13/16″ Thick – 4-1/2″ Minimum stile required
  • Mechanism Case Dim: 2-3/16″ Height x 2-3/16″ Wide
  • UL Listed for both Panic and Fire Exit Hardware
  • Optional REX Request to exit switch
Brand

Finishes

US32D (630) Satin Stainless Steel

Length

33" (for doors 2'8" to 3'0"), 42" (for doors 3'4" to 4'0")

Trim

None - Exit Only (Outside Trim Sold Separately)

Electric Options

Motorized Latch Retraction

Voltage

24VDC Filtered and Regulated

Construction

Heavy Duty Extruded Anodized Aluminum Channel & Steel Chassis

ANSI Grade

Meets & Exceeds ANSI A156.3 – Grade 1 Standards

Usage

Heavy Duty

Fire-Rating

1000R Non-Rated - F1000R 3 Hour UL Listed

ADA Compliance

Meets ADA requirements ANSI A117.1 with Lever Trim

Handing

Non Handed – Completely Reversible

Dogging Feature

Hex key dogging standard on non-fired-rated devices

Latchbolt

Deadlocking latchbolt with 5/8″ projection

Strike

Roller Strike with 5/8″ projection & 1/8″ shim

Stile Type

Wide (Standard)

Projections

3-3/8″ Undogged – 2-13/16″ Dogged (Depressed)

Fasteners

Wood, Machine & Self Tapping Machine Screws

Warranty

1 Year

ELR-1000-Raceway-Template 1000R-Installation-Instructions 1000R-Template Loading...

Related Products

ELR-1000R Rim Exit Device with Electric Latch Retraction
Design Hardware ELR-1000R Rim Exit Device with Electric Latch Retraction