JL Industries Mercury 5 BC Halotron Agent Fire Extinguisher, 5 lbs Nominal Capacity

JL Industries Mercury 5 (FM05C) BC Halotron® Agent Fire Extinguisher, 5 lbs. Nominal Capacity

This model contains the clean extinguishing agent Halotron® 1, which is EPA-approved, government accepted and specified. This agent discharges as a liquid, then quickly evaporates, leaving no residue to clean up afterwards. U.S. FAA-approved for use in airports. NFPA-10 rating. Electrically non-conductive.

The Halotron® I clean agent is an excellent replacement for Halon 1211 extinguishers. Because the extinguishing agent leaves no residue, it is ideal for protecting sensitive electronic equipment, laboratories, museums, and vehicle maintenance facilities.

• CAN/ULC-S556-ANSI/UL2129 & CAN/ULC-S508-ANSI/UL711
• Operation: Squeeze the lever, which opens the valve, allowing the chemical to be forced out.
• Temperature Range: -40° F (-40° C) to 120° F (49° C)
• Construction: Drawn steel cylinder with steel siphon tubes, power cone discharge stream, upright squeeze grip visual pressure gauge and corrosion-resistant paint finish.
• Valve Material: Aluminum
• Cylinder Diameter: 4-1/4″
• Overall Height: 16-3/8″
• Overall Width: 7-1/4″

Tag by others (not included) – All fire extinguishers must be tagged or inspected to be deployed for commercial use

Units meet the current requirements established by the National Fire Protection Association (NFPA) for NFPA10 “Standard for Portable Fire Extinguishers”, and any other applicable NFPA standards. Tested and listed by UL to meet construction and performance standards for this type of extinguisher, and can by used where required by local codes such as OSHA.