JL Industries Grenadier-P Class A Pressurized Water Fire Extinguisher, 2-1/2 Gallon Nominal Capacity

JL Industries Grenadier-P (FP02C) Class A Pressurized Water Fire Extinguisher, 2-1/2 Gallon Nominal Capacity

The Water extinguisher uses ordinary water as it’s extinguishing agent, and can be pressurized with regular air, making recharging the extinguisher simple and economical. Pressurized Water Extinguishers for Class “A” Fires. The “water press” extinguisher contains water and compressed air. Units shipped empty.

• Conforms to Test Standards: CAN/ULC-S507-ANSI/UL626 and CAN/ULC S508-ANSI/UL711
• Operation: Squeeze the lever, which opens the valve, allowing the water to be forced out. Upright squeeze grip operation.
• Temperature Range: 40° F (4° C) to 120° F (49° C)
• Construction: Butt-welded 304-L stainless steel cylinder (eliminates all internal and external crevices). Rugged stainless steel discharge lever and fixed carry handle with visual pressure gauge, pull pin. All-metal valve body with replaceable molded valve stem seal. UL labeled chemical engine hose.
• Class A: Ordinary combustibles; wood, paper, rubber, fabric, plastics

Tag by others (not included) – All fire extinguishers must be tagged or inspected to be deployed for commercial use

Units meet the current requirements established by the National Fire Protection Association (NFPA) for NFPA10 “Standard for Portable Fire Extinguishers”, and any other applicable NFPA standards. Tested and listed by UL to meet construction and performance standards for this type of extinguisher, and can by used where required by local codes such as OSHA.