Product Overview
Design Hardware ELR-1000V Grade-1 Wide Stile Surface Vertical Rod Exit Device with Electric Latch Retraction, 7ft Height, Exit Only, Satin Stainless Steel Finish
ELR – Electric latch retraction/hold back exit devices allow for remote keyless access in high occupancy/high traffic conditions such as hospitals, airports, schools and churches. The device may be continously energized allowing for a push/pull condition if desired.
- Exit Only (Design Hardware Exit Device Trim Sold Separately)
- Door Heights: 7' Standard – Extended Top Rods available for up to 8′ tall doors
- Designed for high traffic conditions such as hospitals, airports, schools, and churches
- Requires low power
- Offers quiet operation
- Operating Voltage: 24VDC Filtered and Regulated
- Amperage: 1 AMP MAX inrush, 400mA MAX Holding
- On-Board diagnostic LED indicators
- Automatic retry
- Low power requirements
- Non polarized leads
- Simultaneous latch retraction and dogging (push pad drepressed)
- Momentary or maintained operation
- UL Listed for both Panic and Fire Exit Hardware
- Optional REX Request to exit switch
| Brand | |
|---|---|
| Finishes |
US32D (630) Satin Stainless Steel |
| Length |
33" (for 2'8" to 3'0" Doors), 42" (for doors 3'4" to 4'0") |
| Fire-Rating |
1000V: None - F1000V: UL Listed - up to 3 Hours |
| Usage |
Heavy Duty |
| Device Type |
Surface Rod Device |
| Electric Options |
Electric Latch Retraction |
| Voltage |
24VDC Filtered and Regulated |
| Stile Type |
Wide (Standard) |
| ANSI Grade |
Meets & Exceeds ANSI A156.3 – Grade 1 Standards |
| Handing |
Non Handed – Completely Reversible |
| Dogging Feature |
Hex key dogging standard on non-fired-rated devices |
| Door Height |
Up to 7'0" Standard (extension top rod for 8'0" doors optional) |
| Door Applications |
1-3/4″ Thick Metal or Wood Doors |
| Warranty |
1 Year |
| Fasteners |
Wood, Machine & Self Tapping Machine Screws |