Product Overview
Trudoor TDE-ALK-1000R Heavy-Duty Grade-1 Rim Exit Device, Battery Powered Alarm Kit Installed, Panic Rated, Exit Only
The TDE-ALK-1000R is designed for primary and secondary exits that require an alarmed panic device. A 90-decibel alarm will sound when someone attempts to exit, alerting management to the unauthorized exit.
- Exit Only (Trudoor Exit Device Trim sold separately)
- UL Listed for Panic Exit Hardware
- Designed for medium to heavy use
- Heavy-duty extruded anodized aluminum mechanism case and cover plate
- Steel chassis, center case cover, push pad, and end cap
- Deadlocking latchbolt with 5/8” projection
- Non-handed for easy installation
- Includes ASA strike (frame) filler plate and 161 door edge filler plate
ALK Alarm Kit
- Factory installed
- Alarm is armed/disarmed by turning key in the mortise cylinder (cylinder included - Schlage C keyway)
- LED flashes green every 30 seconds to indicate alarm is in armed position
- Alarm is activated when push bar is depressed
- Alarm can be bypassed by trim/key from the outside
- 9 Volt battery, life approximately 1 year – Low battery alert indicated by red flash & chirp every 5 seconds
- Decibel Rating: Approximately 90 decibels at 15 feet
- Includes 9-Volt Battery and "Emergency Exit" Sticker for touchpad or door face

| Brand | |
|---|---|
| Finishes |
US32D (630) Satin Stainless Steel |
| Length |
3ft (for doors 2'8" to 3'0"), 4ft (for doors 3'4" to 4'0") |
| Electric Options |
Alarm Kit |
| Cylinder |
1-1/8″ Mortise Cylinder with Straight Cam (included) – 6-Pin, Schlage C Keyway, Includes Two Keys |
| ANSI/BHMA Standard |
Meets ANSI/BHMA A156.3 Grade 1 Standards |
| Usage |
Heavy Duty |
| ADA Compliance |
Meets ADA requirements ANSI A117.1 with Lever Trim |
| UL Listings |
UL Listed for Panic Exit Hardware |
| Fire-Rating |
Non-Fire-Rated |
| Trim |
None - Exit Only (Outside Trim Sold Separately) |
| Latchbolt |
Deadlocking latchbolt with 5/8″ projection |
| Dogging Feature |
None |
| Strike |
Roller Strike with 5/8″ projection & 1/8″ shim |
| Fasteners |
Wood, Machine & Self Tapping Machine Screws |
| Handing |
Non Handed – Completely Reversible |
| Stile Type |
Wide (Standard) |
| Minimum Stile Width |
4-1/2" |
| Center Case |
8” Height x 2-7/8” Wide x 2-13/16” Thick |
| Mechanism Case |
2-3/16″ Height x 2-3/16″ Wide |
| Projections |
3-3/8″ Undogged – 2-13/16″ Dogged (Depressed) |
| Warranty |
Limited Lifetime Warranty |